中文 to عرب
عرب to 中文
.....EN LENS CATALOGUE www.tamron.eu Register at: www.5years.tamron.eu Engineering Plastics Technology Tamron&lsquos unique VC (Vibration Compensation) mechanism PZD (Piezo Drive) / Advanced ultrasonic AF motor Multiple-Cam Mechanism for Smooth, Stable Zooming and Precise Focusing at All Focal Lengths Low Dispersion glass Hybrid Aspherical Elements Extra Refractive Index glass Ultra-Extra Refractive Index glass * This expanded view is used to describe the technologies built into the Model B016, and does not represent the actual configuration or construction of the lens. 16-300mm F/3.5-6.3 Di II VC PZD MACRO Model B016 Designed in every aspect to satisfy the sensibilities of photographers By fusing its innovative technologies with traditional craftsmanship, Tamron has sought to produce lenses that allow you to capture a wide array of scenes in high definition. Our cutting-edge ultra-high-power zoom covers the 16-300mm focal range and is the first in the world* to achieve a zoom magnification ratio of approximately 18.8 times. Proprietary technologies including optical design and coatings optimized for digital characteristics, VC (Vibration Compensation) and a PZD (Piezo Drive) standing wave ultrasonic motor have been condensed into a new elegantly refined, compact and lightweight body. Combining a wide range of shooting scenarios with high definition, high performance and high quality, this lens will continue to open up new possibilities in photographic expression. *Among interchangeable lenses for DSLR cameras (as of June 13, 2014; source: Tamron) Di II series Di III series for digital SLR cameras for APS-C format digital SLR cameras for mirrorless interchangeable-lens cameras Di series All-in-One Zoom Lens 28-300mm F/3.5-6.3 Di VC PZD (Model A010) ••••••••••••••••••••• 10 AF 28-300mm F/3.5-6.3 XR Di (Model A061) •••••••••••••••••••••• 11 SP 24-70mm F/2.8 Di VC USD (Model A007) •••••••••••••••••••••• 13 SP AF 28-75mm F/2.8 XR Di (Model A09) •••••••••••••••••••••••••• 14 SP AF 17-50mm F/2.8 XR Di II VC (Model B005) •••••••••••••••••• 14 SP AF 17-50mm F/2.8 XR Di II (Model A16) •••••••••••••••••••••••• 14 14-150mm F/3.5-5.8 Di III (Model C001) ••••••••••••••••••••••••••• 12 18-200mm F/3.5-6.3 Di III VC (Model B011) ••••••••••••••••••••••• 12 SP 150-600mm F/5-6.3 Di VC USD (Model A011) ••••••••••••••••• 19 SP AF 10-24mm F/3.5-4.5 Di II (Model B001) •••••••••••••••••••••• 15 SP AF 60mm F/2 Di II MACRO 1:1 (Model G005) •••••••••••••••••• 21 SP 70-200mm F/2.8 Di VC USD (Model A009) ••••••••••••••••••••• 17 SP AF 70-200mm F/2.8 Di (Model A001) ••••••••••••••••••••••••••• 17 SP 70-300mm F/4-5.6 Di VC USD (Model A005) •••••••••••••••••• 18 AF 70-300mm F/4-5.6 Di (Model A17) •••••••••••••••••••••••••••••• 18 SP 90mm F/2.8 Di MACRO 1:1 VC USD (Model F004) •••••••••••• 20 SP AF 90mm F/2.8 Di MACRO 1:1 (Model 272E) •••••••••••••••••• 21 SP AF 180mm F/3.5 Di MACRO 1:1 (Model B01) •••••••••••••••••• 21 16-300mm F/3.5-6.3 Di II VC PZD MACRO (Model B016) ••••••••• 09 18-270mm F/3.5-6.3 Di II VC PZD (Model B008) •••••••••••••••••• 11 AF 18-200mm F/3.5-6.3 XR Di II (Model A14) •••••••••••••••••••••• 11 High-Speed Zoom Lens Telephoto Zoom Lens Ultra-Telephoto Zoom Lens Macro Lens Macro Lens All-in-One Zoom Lens All-in-One Zoom Lens High-Speed Zoom Lens Ultra-Wide-Angle Lens 0302 0504 Broadening the possibilities of photographic expression with TAMRON LENS TECHNOLOGIES Compatibility with cameras: Di Di II Di III Di (Digital Integrated Design) lenses are designed for full-frame and APS-C format digital SLR cameras and feature an optical design tailored to the characteristics of digital cameras. Di II lenses have an optical design developed specifically for APS-C format digital cameras, while Di III lenses are designed specifically for mirrorless interchangeable-lens cameras. Also note that Tamron’s AF lenses are available for the individual AF camera mounts adopted by major camera makers. · Some models are not produced for all mounts. Please check the lens specifications on pages 22-23 for mount availability. · Di lenses for Nikon with build-in AF motors do not have aperture rings. · Di II lenses do not have lens-side aperture rings. LD (Low Dispersion) Glass for Greater Lens Sharpness LD (Low Dispersion) glass elements in a lens help reduce chromatic aberration, the tendency of light of different colors to focus at different points on the image plane. Chromatic aberration reduces the sharpness of an image, but glass with an extremely low dispersion index has less of a tendency to separate (diffract) a ray of light into a rainbow of colors. This characteristic allows the lens designer to effectively compensate for chromatic aberration at the center of the field (on axis), a particular problem at long focal lengths (the telephoto end of the zoom range), and for lateral chromatic aberration (toward the edges of the field) that often occurs at short focal lengths (the wide-angle end of the zoom range). XLD (Extra Low Dispersion) Lens XLD (Extra Low Dispersion) lens elements made from specialized ultra-high-grade glass allow Tamron lens designers to achieve much greater control over chromatic aberration (color fringing) and magnification aberrations, the two major factors that inhibit image quality enhancement. In combination with LD elements, XLD elements are used to achieve sophisticated lenses that deliver the highest possible contrast, the finest detail, and superior imaging performance throughout the entire zoom range. Super Performance for the most demanding of Shooters The Tamron SP (Super Performance) series is a line of ultra-high-performance lenses designed and manufactured to the exacting specifications demanded by professionals and others who require the highest possible image quality. In creating SP lenses, Tamron’s optical designers put their foremost priority on achieving superior performance parameters—they are all designed to a higher standard with little regard for cost constraints. As a result, Tamron lenses bearing the SP designation feature impressive and innovative designs that have established an enviable reputation for excellence among those knowledgeable photographers that demand the very best. AD (Anomalous Dispersion) for Better Color Correction AD (Anomalous Dispersion) glass is a special type of optical glass that is used to achieve more precise control of chromatic aberrations, thereby enhancing overall imaging performance. Glass of this type provides an abnormally large partial dispersion ratio (amount of diffraction) for light of specific wavelength ranges (colors) within the visible spectrum. By combining AD glass having these special characteristics with elements made of normal glass having different dispersion characteristics, it is possible to control the dispersion factors of a specific wavelength. This enhanced level of control results in much lower levels of on-axis (central) chromatic aberration for telephoto lenses (or zooms used at telephoto settings) and a significant reduction of lateral (peripheral) chromatic aberration for wide-angle lenses (or zooms used at wide-angle settings). Hybrid Aspherical Elements Provide the Ultimate in Image Quality and Compactness Tamron uses several Hybrid Aspherical lens elements in the 17-50mm VC, 16-300mm VC PZD, 18-270mm VC PZD, 24-70mm VC USD, 28-300mm VC PZD and other lenses bearing the Aspherical designation. These innovative optics allow us to achieve the ultimate in image quality, and at the same time produce lenses that offer remarkable zoom ranges in extraordinarily compact packages. By perfecting these cutting-edge advances for series production, Tamron has advanced the state of optical design, and virtually eliminated spherical aberration and image distortion from the high-power-zoom series. Through the effective application of Hybrid Aspherical Technology, one lens element can take the place of multiple elements without compromising performance. This is what allows us to produce remarkably compact long-range lenses that deliver a uniformly high level of image quality at all focal lengths and apertures. Special Glass for Better Performance and More Compact Lens Designs By minimizing the overall length of the optical system, Tamron has succeeded in drastically reducing lens diameter and reducing overall lens size for the same focal length and same maximum F-number. By utilizing XR (Extra Refractive Index) glass, Tamron has achieved a compact size together with good correction of aberrations while maintaining the optimum balance of overall optical power. Moreover, through the active utilization of UXR (Ultra-Extra Refractive Index) glass, Tamron has developed even more compact designs while achieving good correction of aberrations. Principles enabling more compact sizes at the same lens brightness XR glass, with its superior light-bending power, makes it possible to design a short-barrel lens with the same light-gathering ability (aperture value) as a long-barrel lens—even with a smaller lens diameter. By using this principle Tamron has been able to shorten the length of the entire optical system and produce lighter, more compact lenses of the same speed, and also to provide greater zoom ranges in lenses that are much more convenient to carry and hand-hold. New eBAND (Extended Bandwidth & Angular-Dependency) Coating This new coating technique developed by Tamron deploys a nano- structured layer (1nm = 1/1,000,000mm) of ultra-low refractive index, with dimensions smaller than the wavelengths of visible rays of light. This nano- structured layer coupled with the sophisticated multiple layer coatings underneath, yields significant anti-reflection properties, efficiently reducing undesired flare and ghosting to an absolute minimum to deliver sharp, crisp images. · Lenses employing eBAND coating display the above “eBAND Coating” mark on their respective product pages. Schematic diagram eBAND Coating Conventional Coating Lenses with eBAND Coating offer dramatically improved control over flare and ghosting even in extremely poor light conditions. Advanced BBAR Lens Coating Technology: The Key to Attaining the Highest Image Quality Tamron uses advanced multi-coating techniques to suppress reflections and light dispersion on lens element surfaces that result in reduced light transmission and may, under adverse conditions, cause flare and ghost images that reduce contrast and can diminish image quality. The BBAR (Broad- Band Anti-Reflection) multiple-layer coating technique also helps to provide the best possible color balance for vibrant and accurate color rendition. Tamron has developed an improved proprietary version of BBAR multi-coating that successfully increases light transmission in both longer and shorter wavelengths. Moisture-resistant Construction A moisture-resistant construction helps prevent moisture from penetrating the lens. · Lenses employing a moisture-resistant construction display the “Moisture Resistant” mark on their respective product pages. Image plane Image plane Regular Optical Glass LD Glass The difference in chromatic aberration between normal optical glass and LD glass elements (schematic diagram) Compensation effect with an aspherical lens element (schematic diagram) The difference in partial dispersion factors between normal optical glass and AD glass elements (schematic diagram) Regular Optical Glass Possesses a relatively uniform partial dispersion ratio Extremely large partial dispersion ratio relatively to a specific wavelength zone AD Glass Distortion Correction (Barrel type) Aspherical surface Compensation for Spherical Aberration The corrected height of incident light rays at the image plane Image plane Image plane Image plane Aspherical lens element Unbalanced height of oblique incident light rays causes distortion at the image plane. Tamron’s aspherical lens design continuously varies the refracting angles of these unbalanced light rays. Spherical surface The uncorrected height of incident light rays through a spherical lens element Spherical lens element More compact lenses with the same speed: It’s all in the barrel barrel (rear view) long barrel (optics) short barrel (optics) barrel (side view) Nano-structured layer Incident light Incident light Reflected light Reflected light Multi-layer coating Multi-layer coating Moisture-resistant construction diagram for Model A007: 0706 TAMRON LENS TECHNOLOGIES IF (Internal Focusing) System IF (Internal Focusing) provides numerous practical benefits to photographers including a non-rotating front filter ring that facilitates the positioning of polarizing and graduated filters, and more predictable handling because the lens length does not change during focusing. Even more important, Tamron’s IF system provides a much closer Minimum Focusing Distance (MFD) throughout its entire focusing range. In addition, IF improves optical performance by minimizing illumination loss at the corners of the image field (vignetting), and helps to suppress other aberrations that become more troublesome at different focusing positions. ZL (Zoom Lock) Feature Another original Tamron mechanical engineering concept is ZL (Zoom Lock), a simple convenience feature that prevents undesired extension (creep) of the lens barrel when carrying the camera/lens unit on a neck strap. This enhances responsiveness in the field and helps protect the lens. Multiple-Cam Mechanism for Smooth, Stable Zooming and Precise Focusing at All Focal Lengths The manufacture of compact, high-quality, high-power zoom lenses became a reality only when Tamron perfected a lens chassis that permitted stable and smooth extension of the lens barrel. The “Multiple-Cam Zoom Mechanism” is an original Tamron design that incorporates several precision cams cut into a single cylindrical surface using high-tech automated machinery. This key component enables zoom lens barrels to be extended and retracted effortlessly, achieving commendably compact dimensions at the wide-angle settings, while holding precise extension at telephoto settings. Integrated Focus Cam Design for Optimizing Internal Focusing Tamron’s Integrated Focus Cam is a precision mechanical component that optimizes the coordinated movement of the Internal Focusing (IF) system with the Multiple-Cam Zoom Mechanism. This ingenious Focus Cam is designed to ensure seamless and precise positioning of all the highly sophisticated internal elements within the lens and coordinate them with the convenient external zoom and focus controls that comprise the user interface. Engineering Plastics Technology To ensure the highest levels of performance and durability without adding additional weight, Tamron High-Power Zoom Lenses make extensive use of engineering plastic materials in many critical mechanical components of the lens. Tamron has developed advanced proprietary methods for manufacturing these advanced polycarbonate materials to a very high degree of precision, and repeated tests have confirmed their long-lasting properties and dimensional stability under the toughest conditions. Indeed, polycarbonate of this caliber is the material of choice whenever we produce high-precision components that require the strength to withstand rigorous use. Different Angles of View with Different Focal Lengths PZD (Piezo Drive) An exclusive Tamron innovation, PZD (Piezo Drive) is an advanced ultrasonic, AF (autofocus) motor based on the latest piezoelectric technology—the standing wave principle. It utilizes high-frequency voltage to turn a ceramic piezoelectric element with a swiveling motion, causing the metal tip at the rotor’s contact point to rotate elliptically, thereby turning the rotor to focus the lens swiftly, silently, and with great precision. Standing wave ultrasonic motors like the one used in Tamron’s innovative PZD have a number of advantages. They’re smaller and lighter and also provide faster and quieter operation than DC motors for improved AF performance. Compared with their predecessors, their actuator system allows far greater flexibility in lens design, reducing the overall size and weight of the lens. · Lenses equipped with PZD incorporate “PZD” in their product names. PZD Unit Diagram USD (Ultrasonic Silent Drive) USD (Ultrasonic Silent Drive) is an ingeniously upgraded autofocus-drive system developed by Tamron to deliver the extraordinary auto-focusing speed and precision needed to capture every nuance of high-speed sports action, along with virtually noiseless operation as required for discreet picture taking. Based on advanced motor technology and newly developed software, it employs a piezoelectric ceramic element to generate two high-frequency ultrasonic vibrations on the motor’s stator ring. This in turn causes the adjacent metallic rotor to rotate by means of deflective traveling waves when voltage of a specific frequency is applied. This advanced electronically controlled autofocus system is linked to a precision focusing helical that moves the lens to the precise focuspoint. The result: A remarkable new level of AF speed, accuracy, smoothness and silence. · Lenses equipped with USD incorporate “USD” in their product names. Sophisticated Tamron Production Technology Tamron manufacturing processes are certified to demanding ISO 9001 standards, an internationally recognized indicator of the most thorough quality control. Tamron’s high-power zoom lenses come out of a factory that is well known for delivering on its world-class capabilities, and is widely respected for its unwavering policy of delivering excellent quality products that meet the total satisfaction of its valued customers. Tamron’s Quality Assurance and Environmental Protection Activities ISO Standards ISO stands for the International Organization for Standardization. These international standards include the ISO 9000 family of standards relating to quality system management, and the ISO 14000 series for certification of environmental management systems. Certification regarding the environment and quality control is also being applied to all of Tamron. Environment Tamron has been actively addressing concerns about the earth’s environment through efforts to reduce the environmental footprint of its business operations based on ISO 14001. Specifically, Tamron has promoted the “Green Procurement” policy for abrogating harmful substances from the beginning and reinforcing positive environmental programs. At Tamron, we have addressed such issues as energy savings and waste reduction and recycling for reducing environmental loads generated from the manufacture of products. Such activities promote the development of high quality, compact and environmentally friendly products to satisfy customers. Since 2004, Tamron has also issued Environmental Reports to introduce its socially responsible philosophy and practices for environmental preservation. For further details, please visit Tamron’s website at http://www.tamron.co.jp/en/envi/top/index.html ISO 9001 Quality Control Policy Provide customer satisfaction by delivering high quality products. ISO 14001 Environmental Management Philosophy In accordance with its corporate management philosophy, Tamron’s goal is to create and deliver superior quality products and services to meet customer needs. Furthermore, each Tamron employee is fully committed to the preservation of the global environment at every level and for each facet of company activities. At Tamron, we recognize the significance of our social responsibilities. ISO 14001 The Fundamentals of the Environmental Conservation Policy 1. Compliance with legislation relevant to environmental conservation 2. Conservation and protection of natural resources 3. Prevention of environmental contamination 4. Continued promotion of an environmental conservation program 5. Promote design philosophy and development of environmentally friendly products to contribute to environmental protection 6. Promote environmental education 7. Disclosure of environmental-related information to the public Introducing “VC” — Tamron’s Unique Vibration Compensation Mechanism Tamron’s unique VC (Vibration Compensation) mechanism uses a proprietary actuator and algorithms to deliver an extremely stable viewfinder image with excellent tracking. The mechanism uses a three-coil system to electromagnetically drive the lens element that compensates for vibration, which glides smoothly on three balls with little friction. This simple mechanical structure is one of the secrets to Tamron’s compact lenses. · Lenses equipped with VC incorporate “VC” in their product names. Taken under the same conditions using a vibrating table Focal length: 300mm Exposure: F/9 at 1/30 sec Stepping Motor The stepping motor’s actuator allows finely tuned control of angular rotation, and since it drives the focusing mechanism directly without an intermediate reduction gear, it also provides superbly quiet performance. · A stepping motor is loaded on the B011 (18-200mm VC), C001 (14-150mm). Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã Ã 10mm (Equivalent to 16mm) 16mm (Equivalent to 25mm) 18mm (Equivalent to 28mm) 24mm (Equivalent to 37mm) 28mm (Equivalent to 43mm) 35mm (Equivalent to 54mm) 28mm24mm 35mm 50mm (Equivalent to 78mm) 70mm (Equivalent to 109mm) 90mm (Equivalent to 140mm) 135mm (Equivalent to 209mm) 200mm (Equivalent to 310mm) 270mm (Equivalent to 419mm) 300mm (Equivalent to 465mm) 500mm (Equivalent to 775mm) 50mm 70mm 90mm 135mm 200mm 270mm 300mm 500mm Taken with an APS-C size digital camera Tamron’s conversion value is 1.55x Taken with a full-size camera ON OFF Expanded VC (Vibration Compensation) - Schematic Diagram for Model B016 VC microcomputer Magnets Ceramic ball bearings Driving coils VC Lens (Compensation Optical System) Yoke Gyro sensor Stepping Motor Schematic Diagram for Model B011 Guide Shaft Stepping motor Lens holding frame Nut Lead screw Drive Signal Metal tip Rotor Pressurization equipment Model 24-70mm VC USD (A007) Piezoelectric element 0908 MODEL B016 · Focal length: 16mm · Exposure: F/16 at 0.8 sec · ISO: 200 New All-in-One Zoom Lens MODEL B016 16-300mm F/3.5-6.3 Di II VC PZD MACRO for Nikon, Canon 16-300mm F/3.5-6.3 Di II PZD MACRO for Sony* 1 An amazing approx. 18.8x zoom covering 16mm at the wide end to 300mm at the super-telephoto end Experience previously unimaginable photographic possibilities with this extremely versatile megazoom lens loaded with the latest technology from the optical industry. With an unprecedented focal range of 16mm at the wide end to 300mm at the super-telephoto end, along with VC (Vibration Compensation) and a comfortable PZD (Piezo Drive) autofocusing, Tamron has achieved a compact body size. Ideal also for macro photography, the lens sports a minimum focusing distance of 0.39m (maximum image magnification of 1:2.9). Thoroughly compensating for aberrations with three glass molded aspherical elements, two LD elements, one UXR element and other specialized glass elements, and featuring the latest coating technologies to dramatically inhibit flare and ghosting, Tamron has delivered a breakthrough in sharp picture quality. Di II Di II for APS-C format digital SLR cameras Approx. 18.8x magnification is attained. Capturing a wide view at 16 mm 16mm (Equivalent to 25mm) B016 Different Angles of View 16mm (Equivalent to 25mm) 300mm (Equivalent to 465mm) 18mm (Equivalent to 28mm) *1 The Sony mount does not include the VC image stabilization functionality, as Sony digital SLR camera bodies include image stabilization functionality. *Length is the distance between the mount face and the tip of the lens. Lens Construction Hybrid Aspherical Lens LD element XLD (Extra Low Dispersion) glass AD element XR (Extra Refractive Index) glass UXR (Ultra-Extra Refractive Index) glass Molded-Glass Aspherical Lens Lens Construction: 16 elements in 12 groups Filter Size: ø 67mm Length*: 99.5mm Weight: 540g Minimum Focus Distance: 0.39m (Throughout the entire zoom range) MODEL B016 · Focal length: 16mm · Exposure: F/9 bei 1/160 sec. · ISO: 800 All-in-One Zoom Lens High-Speed Zoom Lens Ultra-Wide-Angle Lens T elephoto Zoom Lens Ultra-T elephoto Zoom Lens Macr o Lens 1110 MODEL A010 · Focal length: 91mm · Exposure: F/9 at 1/300 sec · ISO: 100 MODEL B008 · Focal length: 23mm · Exposure: F/5.6 at 1/1000 sec · ISO: 200 New All-in-One Zoom Lens All-in-One Zoom Lens MODEL A010 28-300mm F/3.5-6.3 Di VC PZD for Nikon, Canon 28-300mm F/3.5-6.3 Di PZD for Sony* 1 A high-power zoom lens for full-size SLR with enhanced image quality, compactness and lightweight features More than two decades have passed since the revolutionary 28-200mm high power zoom lens, the Model 71D, hit the market. In response to the widespread use of full-sized digital SLR cameras, this high power zoom lens now comes with even more sophisticated features. It adopts three Molded-Glass Aspherical elements, four LD elements, one UXR element and other specialized glass elements for excellent correction of different aberrations. The result is superior image performance with a smaller lens unit. It is also equipped with a PZD standing-wave ultrasonic motor for faster autofocus and noise reduction, together with a VC (Vibration Compensation) that effectively corrects camera shaking that can occur under poor light conditions or in the telephoto range. The result is a much easier handheld shooting experience. Approx. 10.7x magnification is attained. A010 Different Angles of View Di Di for digital SLR cameras Lens Construction: 19 elements in 15 groups Filter Size: ø 67mm Length*: 96mm Weight: 540g Minimum Focus Distance: 0.49m (Throughout the entire zoom range) *1 The Sony mount does not include the VC image stabilization functionality, as Sony digital SLR camera bodies include image stabilization functionality. *Length is the distance between the mount face and the tip of the lens. Lens Construction Hybrid Aspherical Lens LD element XLD (Extra Low Dispersion) glass AD element XR (Extra Refractive Index) glass UXR (Ultra-Extra Refractive Index) glass Molded-Glass Aspherical Lens 18-270mm F/3.5-6.3 Di II VC PZD for Nikon, Canon 18-270mm F/3.5-6.3 Di II PZD for Sony* 1 AF 18-200mm F/3.5-6.3 XR Di II LD Aspherical [IF] MACRO for Nikon, Canon, Sony, Pentax AF 28-300mm F/3.5-6.3 XR Di LD Aspherical [IF] MACRO for Sony, Pentax A high-power zoom lens featuring VC and PZD, producing a 15x zoom covering 18mm to 270mm in a lightweight, compact body. Enhances the power of your photographic expression by achieving sharp, clear picture quality. A high-power zoom lens that features exceptional mobility in a compact design, producing 11.1x zoom that enables the shooting of infinite scenes, from wide angle to telephoto in a single lens. Corrects aberrations effectively to deliver high rendering performance. An all-rounder high-power zoom lens, fit for everything from super-telephoto to full-fledged macro shooting. LD, AD and XR elements mean superior rendering performance across the entire zoom range. Di II Di II Lens Construction: 16 elements in 13 groups Filter Size: ø 62mm Length*: 88mm Weight: 450g Minimum Focus Distance: 0.49m (Throughout the entire zoom range) Lens Construction: 15 elements in 13 groups Filter Size: ø 62mm Length*: 83.7mm Weight: 405g Minimum Focus Distance: 0.45m (Throughout the entire zoom range) Lens Construction: 15 elements in 13 groups Filter Size: ø 62mm Length*: 85.7mm Weight: 435g Minimum Focus Distance: 0.49m (Throughout the entire zoom range) MODEL B008 MODEL A14 MODEL A061 Best Consumer Lens of the Year 2005 The 2005 American PHOTO Editor&lsquos Choice Awards Di Di II for APS-C format digital SLR camerasDi for digital SLR cameras 28mm 300mm All-in-One Zoom Lens High-Speed Zoom Lens Ultra-Wide-Angle Lens T elephoto Zoom Lens Ultra-T elephoto Zoom Lens Macr o Lens All-in-One Zoom Lens High-Speed Zoom Lens Ultra-Wide-Angle Lens T elephoto Zoom Lens Ultra-T elephoto Zoom Lens Macr o Lens 1312 MODEL C001 · Focal length: 17mm · Exposure: F/7.1 at 1/320 sec · ISO: 200 MODEL A007 · Focal length: 24mm · Exposure: F/4 at 1/60 sec · ISO: 100 All-in-One Zoom Lens Di III for mirrorless interchangeable-lens cameras MODEL C001 MODEL B011 Di III Di III A 10.7x high power zoom lens covering 14-150mm focal range (equivalent to 28- 300mm in 35mm format), incorporating Molded-Glass Aspherical elements, LD elements and other specialized glass elements for excellent correction of different aberrations to achieve superior imaging performance. Lens Construction: 17 elements in 13 groups Filter Size: ø 52mm Length*: 80.4mm Weight: 285g Minimum Focus Distance: 0.5m (Throughout the entire zoom range) Lens Construction: 17 elements in 13 groups Filter Size: ø 62mm Length*: 96.7mm Weight: 460g Minimum Focus Distance: 0.5m (Throughout the entire zoom range) 14-150mm F/3.5-5.8 Di III for Micro Four Thirds System 18-200mm F/3.5-6.3 Di III VC for mirrorless interchangeable-lens cameras (APS-C format) : Canon, Sony A high power zoom lens with superior image quality covering 18-200mm (equivalent to 28-310mm in 35mm format) incorporates VC (Vibration Compensation) and a low- noise stepping motor for autofocus mechanism. Enjoy a more comfortable video shooting experience, with expanded shooting options. · This lens cannot be used with digital SLR cameras with built-in mirror box or with SLR cameras for 35mm film. · This product conforms to the "Micro Four Thirds System Standard" established by Olympus Imaging Corporation and Panasonic Corporation. Micro Four Thirds™ and the Micro Four Thirds logo marks are trademarks or registered trademarks of Olympus Imaging Corporation, in Japan, the United States, the European Union, and other countries. The company names and product names in this document are the trademarks or registered trademarks of their respective owners. · This lens cannot be used with any digital SLR camera with a built-in mirror box or with any SLR camera for 35mm film. · The Sony version of this model complies with the E-mount specifications. It has been developed after disclosure of the basic specifications of the E-mount from Sony Corporation. A high power zoom lens for the Micro Four Thirds System helps swiftly capture different views at the angle of field you choose A high power zoom lens for mirrorless SLR cameras produces images of superb quality in a compact and lightweight body Wins TIPA Awards 2012 Best CSC Entry Level Lens CSC:Compact System Camera High-Speed Zoom Lens MODEL A007 A high-quality, high-performance fast standard zoom lens with VC and USD. From portraits to landscapes and studio work, enjoy rendering power like never before. Lens Construction: 17 elements in 12 groups Filter Size: ø 82mm Length*: 108.5mm Weight: 825g Minimum Focus Distance: 0.38m (Throughout the entire zoom range) · For information on compatibility with cameras designed for Sony mount lenses, please check on page 22 (Cameras subject to restrictions in the use of Di series lenses for the Sony mount with built-in AF motors). A high-speed F/2.8 standard zoom lens painstakingly crafted in the pursuit of high-level rendering performance Di for digital SLR cameras Di SP 24-70mm F/2.8 Di VC USD for Nikon, Canon SP 24-70mm F/2.8 Di USD for Sony* 1 *1 The Sony mount does not include the VC image stabilization functionality, as Sony digital SLR camera bodies include image stabilization functionality. *Length is the distance between the mount face and the tip of the lens. Lens Construction Hybrid Aspherical Lens LD element XLD (Extra Low Dispersion) glass AD element XR (Extra Refractive Index) glass UXR (Ultra-Extra Refractive Index) glass Molded-Glass Aspherical Lens New All-in-One Zoom Lens High-Speed Zoom Lens Ultra-Wide-Angle Lens T elephoto Zoom Lens Ultra-T elephoto Zoom Lens Macr o Lens All-in-One Zoom Lens High-Speed Zoom Lens Ultra-Wide-Angle Lens T elephoto Zoom Lens Ultra-T elephoto Zoom Lens Macr o Lens 1514 MODEL B005 · Focal length: 17mm · Exposure: F/11 at 1/500 sec · ISO: 200 MODEL B001 · Focal length: 10mm · Exposure: F/22 at 1/50 sec · ISO: 100 High-Speed Zoom Lens Ultra-Wide-Angle Lens SP AF 17-50mm F/2.8 XR Di II LD Aspherical [IF] for Nikon, Canon, Sony, Pentax SP AF 17-50mm F/2.8 XR Di II VC LD Aspherical [IF] for Nikon, Canon SP AF 28-75mm F/2.8 XR Di LD Aspherical [IF] MACRO for Nikon, Canon, Sony, Pentax Enjoy the potential of a high-quality, high-performance fast standard zoom lens with a constant F/2.8 aperture equipped with VC (Vibration Compensation). Unleash your photographic freedom with the ability to easily shoot hand-held, even in low light. An extremely compact fast standard zoom lens that combines astounding picture quality with superior versatility and cost effectiveness. Enjoy the beautiful rendering of scenes unique to a constant F/2.8 aperture lens. A fast standard zoom lens delivering high picture quality, balancing a compact form with the exceptional image performance that comes from ensuring uniform light intensity across the entire frame and a constant F/2.8 aperture. Close-up shooting down to 0.33m is available. Di II for APS-C format digital SLR camerasDi for digital SLR cameras Di II Di II Di II Di MODEL B005 MODEL A16 MODEL A09 Lens Construction: 19 elements in 14 groups Filter Size: ø 72mm Length*: 94.5mm Weight: 570g Minimum Focus Distance: 0.29m (Throughout the entire zoom range) Lens Construction: 12 elements in 9 groups Filter Size: ø 77mm Length*: 86.5mm Weight: 406g Minimum Focus Distance: 0.24m (Throughout the entire zoom range) Lens Construction: 16 elements in 13 groups Filter Size: ø 67mm Length*: 83.2mm Weight: 440g Minimum Focus Distance: 0.27m (Throughout the entire zoom range) Lens Construction: 16 elements in 14 groups Filter Size: ø 67mm Length*: 92mm Weight: 510g Minimum Focus Distance: 0.33m (Throughout the entire zoom range) Di II for APS-C format digital SLR cameras *Length is the distance between the mount face and the tip of the lens. Lens Construction Hybrid Aspherical Lens LD element XLD (Extra Low Dispersion) glass AD element XR (Extra Refractive Index) glass UXR (Ultra-Extra Refractive Index) glass Molded-Glass Aspherical Lens MODEL B001 Featuring a high-precision Molded-Glass Aspherical element and three hybrid aspherical elements, this lens delivers high rendering performance at wide focal lengths of 10-24mm (equivalent to 16-37mm in 35mm format) despite its compact body. An ultra-wide-angle zoom for easily capturing wide vistas that exceed your own vision SP AF 10-24mm F/3.5-4.5 Di II LD Aspherical [IF] for Nikon, Canon, Sony, Pentax All-in-One Zoom Lens High-Speed Zoom Lens Ultra-Wide-Angle Lens T elephoto Zoom Lens Ultra-T elephoto Zoom Lens Macr o Lens All-in-One Zoom Lens High-Speed Zoom Lens Ultra-Wide-Angle Lens T elephoto Zoom Lens Ultra-T elephoto Zoom Lens Macr o Lens 1716 MODEL A009 · Focal length: 200mm · Exposure: F/5.6 at 1/2000 sec · ISO: 200 MODEL A009 · Focal length: 121mm · Exposure: F/13 at 1/100 sec · ISO: 100 Telephoto Zoom Lens MODEL A009 MODEL A001 Pursuing the ultimate in quality. This high image-quality, high-performance fast telephoto zoom lens sports a constant F/2.8 aperture and comes equipped with VC and USD. Specialized glass elements including XLD and LD elements are used to fully correct for chromatic aberration while the advanced optical design achieves even better contrast and excellent resolving performance. A breakthrough in lightweight design, this fast telephoto zoom lens offers stunning mobility. This lens will exceed your expectations every time with its fast F/2,8 aperture and the boldly blurring results that make the subject “pop out” of your photo. The lens also boasts exceptional close-focusing performance, with a minimum focusing distance of 0.95m (macro magnification of 1:3.1 at 200mm) across the entire zoom range. A wide-aperture telephoto zoom lens packed into a body that is the smallest* 2 in its class A lightweight, high-performance fast telephoto zoom lens that makes light work of F/2.8 telephoto shooting SP 70-200mm F/2.8 Di VC USD for Nikon, Canon SP 70-200mm F/2.8 Di USD for Sony* 1 SP AF 70-200mm F/2.8 Di LD [IF] MACRO for Nikon, Canon, Sony, Pentax Di for digital SLR cameras Di Di *2 Among fast telephoto zoom lenses for full-frame SLR cameras equipped with VC image stabilization and USD. Current as of October 2012 (Source: Tamron) · For information on compatibility with cameras designed for Sony mount lenses, please check on page 22 (Cameras subject to restrictions in the use of Di series lenses for the Sony mount with built-in AF motors). Lens Construction: 23 elements in 17 groups Filter Size: ø 77mm Length*: 188.3mm Weight: 1,470g (Includes the weight of the detachable tripod mount) Minimum Focus Distance: 1.3m (Throughout the entire zoom range) Lens Construction: 18 elements in 13 groups Filter Size: ø 77mm Length*: 194.3mm Weight: 1,320g (Includes the weight of the detachable tripod mount) Minimum Focus Distance: 0.95m (Throughout the entire zoom range) *1 The Sony mount does not include the VC image stabilization functionality, as Sony digital SLR camera bodies include image stabilization functionality. *Length is the distance between the mount face and the tip of the lens. Lens Construction Hybrid Aspherical Lens LD element XLD (Extra Low Dispersion) glass AD element XR (Extra Refractive Index) glass UXR (Ultra-Extra Refractive Index) glass Molded-Glass Aspherical Lens All-in-One Zoom Lens High-Speed Zoom Lens Ultra-Wide-Angle Lens T elephoto Zoom Lens Ultra-T elephoto Zoom Lens Macr o Lens 1918 MODEL A005 · Focal length: 300mm · Exposure: F/8 at 1/640 sec · ISO: 200 MODEL A011 · Focal length: 600mm · Exposure: F/8 at 1/2000 sec · ISO: 800 Telephoto Zoom Lens Ultra-Telephoto Zoom Lens MODEL A005 MODEL A17 High-grade specialized XLD elements and the latest optical design ensure sharp, high-contrast rendering performance. Enjoy shooting at telephoto end or capturing fast-moving subjects. The inclusion of VC provides stability when shooting at the telephoto range, which is susceptible to blurring due to camera shake, and offers more freedom for hand-held shooting under low light, such as evening and night scenes. This ultra-telephoto zoom lens boasts wide coverage from 150mm to 600mm. Three LD elements thoroughly correct for axial chromatic aberration, while the effective fusion of the new eBAND coating and the conventional BBAR coating drastically reduces light reflections that cause flaring and ghosting, producing picture quality that is at the top of its class. The full-time manual focus mechanism allows you to intervene at any time even in the autofocus mode, for fast and convenient, fine and precise adjustments in sharpness. The tripod mount also boasts greater stability, sturdiness and operability, as well as vastly improved portability. A moisture-resistant construction rounds off this superb lens. With its compact, lightweight design, this telephoto zoom lens offers exceptional mobility, while giving you impressive 300mm telephoto (465mm equivalent with APS-C size DSLRs) images and full-fledged macro shooting with a maximum magnification of 1:2. Toggle on the macro switch at a zoom telephoto range of between 180mm and 300mm, and you can approach your subject down to a minimum focus distance of 0.95m. A high image-quality, high-performance telephoto zoom lens equipped with VC and USD An ultra-telephoto zoom lens to capture dynamic energy with sharpness equipped with VC and USD A telephoto zoom lens offering high picture quality plus strong macro performance SP 70-300mm F/4-5.6 Di VC USD for Nikon, Canon SP 70-300mm F/4-5.6Di USD for Sony* 1 SP 150-600mm F/5-6.3 Di VC USD for Nikon, Canon SP 150-600mm F/5-6.3 Di USD for Sony* 1 Di for digital SLR cameras Di for digital SLR cameras Di Di Di · For information on compatibility with cameras designed for Sony mount lenses, please check on page 22 (Cameras subject to restrictions in the use of Di series lenses for the Sony mount with built-in AF motors). Lens Construction: 17 elements in 12 groups Filter Size: ø 62mm Length*: 142.7mm Weight: 765g Minimum Focus Distance: 1.5m (Throughout the entire zoom range) Lens Construction: 13 elements in 9 groups Filter Size: ø 62mm Length*: 116.5mm Weight: 458g Minimum Focus Distance: 1.5m (0.95m macro) TIPA Awards 2011 Best Entry Level Lens MODEL A011 New TIPA Awards 2014 Best Expert DSLR Lens "